Clippasafe 118/1 Extendable, Dual Fix Push to Lock Gate Instrukcja Użytkownika Strona 1

Extendable, Dual Fix,Push to Lock Gate WIDTHHEIGHTAdjustable from 69.5 to 106.5 cm Top of gate to floor 75 cm GATEIMPORTANT - READ AND FOLLOWTH

Apply downward pressure to the gate from the middle of the top bar. Ensure that when closed, the distance between the gate and the wall on both sides

max 63 mmmin 21 mmmax 63 mmmin 21 mm!3219. To open the gate, press and hold the foot pedal with your foot (1). Holding the gate in the middle of the

Please make sure that the barrier is properly closed after each use.10. Ensure that the gate and the pedal are level when installed and closed. Adjust

Pre-Installation AdviceWARNING - Never use without wall cupsWARNING - Gate must be fitted upright as shownWARNING - Do not use the safety barrier if a

Installation InstructionsFor Pressure FittingX1 = 69.5 76.5 cm X2 = 76.5 84.5 cm X3 = 84.5 91.5 cm X4 = 91.5 98.5 cm X5 = 98.5 106.5 cm

4. Attach the pedal ‘F’ to the centre of the gate using the two screws ‘G’ provided. Use the correct holes, depending on the width of the op

360°x6360°x6Fix the wall-cups ‘C’ to the wall using appropriate fixings depending on the wall surface:Wood screws for wooden surfaces, appropriate wal

Apply downward pressure to the gate from the middle of the top bar. Ensure that when closed, the distance between the gate and the wall on both sides

3219. To open the gate, press and hold the foot pedal with your foot (1). Holding the gate in the middle of the top bar, push down (2) and finally li

Installation InstructionsFor Hinged Mounting1X1 = 69,5 77 cm X2 = 77 84,5 cm X3 = 84,5 92 cm X4 = 92 99 cm X5 = 99 106,5 cm XABCDE1+++++111

489 mm756 mm2288 mm755 mmJC5. Mark the positions for the hinges ‘J’ on the wall surface you want the gate to hinge from. The top hole for the lower